Features of Adapter sleeve:
Adapter sleeve (H)
Adapter sleeves are the most commonly used components for locating bearings that has a tapered bore, onto cylindrical shaft seating's as they can be employed both on smooth shafts and stepped shafts.
They are easy to mount and require no additional fixation on the shaft. Using adapter sleeves on smooth shafts, the bearing can be located at any position on the shaft . EESCO adapter sleeves are supplied complete with lock nut and locking device.
Adapter sleeve for oil injection (OH)
These sleeves have an oil supply duct (or ducts) at the threaded side of the sleeve and distributor grooves in the bore as well as the outside surface.
Sleeves up to and including size 40 have on supply duct, larger sleeves have two.
Withdrawal sleeve (AH)
Withdrawal sleeves can be used to mount bearings with tapered bore on cylindrical seating's of stepped shafts. The sleeve is pressed into the bore of the bearing that abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. The sleeves are slotted and have an external taper of 1:12 or 1:30.
Withdrawal sleeves for oil injection (AOH)
These AOH sleeves have two oil supply ducts at the threaded side as well as oil distributor grooves in the circumferential and axial directions, both in the outside surface and the sleeve bore. If oil is injected through these ducts and grooves, an oil film is formed between the mating surfaces of the bearing and sleeve and between the shaft and sleeve, and the force required to mount the bearing is considerably reduced.
Adapter Sleeve | Shaftd1 | Dimensions(mm) | Weight (kg) | Composition | |||||||||
HS in | HA in | HE in | H mm | d | d2 | B1 | B2 | G | Sleeve | Locknut | Lockwasher | ||
H204 | 17 | 20 | 32 | 24 | 7 | M20x1 | 0.041 | A204 | KM4 | MB04 | |||
H205 | 7/8 | 13/16 | 3/4 | 20 | 25 | 38 | 26 | 8 | M25x1.5 | 0.07 | A205 | KM5 | MB05 |
H206 | 7/8 | 15/16 | 1 | 25 | 30 | 45 | 27 | 8 | M30x1.5 | 0.1 | A206 | KM6 | MB06 |
H207 | 1-1/8 | 1-3/16 | 1-1/4 | 30 | 35 | 52 | 29 | 9 | M35x1.5 | 0.13 | A207 | KM7 | MB07 |
H208 | 1-3/8 | 1-5/16 | 1-1/4 | 35 | 40 | 58 | 31 | 10 | M40x1.5 | 0.17 | A208 | KM8 | MB08 |
H209 | 1-5/8 | 1-7/16 | 1-1/2 | 40 | 45 | 65 | 33 | 11 | M45x1.5 | 0.23 | A209 | KM9 | MB09 |
H210 | 1-5/8 | 1-11/16 | 1-3/4 | 45 | 50 | 70 | 35 | 12 | M50x1.5 | 0.27 | A210 | KM10 | MB10 |
H211 | 1-7/8 | 1-15/16 | 2 | 50 | 55 | 75 | 37 | 12 | M55x2 | 0.31 | A211 | KM11 | MB11 |
H212 | 2-1/8 | 2-1/16 | 2-1/4 | 55 | 60 | 80 | 38 | 13 | M60x2 | 0.35 | A212 | KM12 | MB12 |
H213 | 2-3/8 | 2-3/16 | 2-1/4 | 60 | 65 | 85 | 40 | 14 | M65x2 | 0.4 | A213 | KM13 | MB13 |
H214 | 60 | 70 | 92 | 41 | 14 | M70x2 | 0.6 | A214 | KM14 | MB14 | |||
H215 | 2-5/8 | 2-7/16 | 2-1/2 | 65 | 75 | 98 | 43 | 15 | M75x2 | 0.71 | A215 | KM15 | MB15 |
H216 | 2-7/8 | 2-11/16 | 2-3/4 | 70 | 80 | 105 | 46 | 17 | M80x2 | 0.88 | A216 | KM16 | MB16 |
H217 | 2-15/16 | 3 | 75 | 85 | 110 | 50 | 18 | M85x2 | 1.02 | A217 | KM17 | MB17 | |
H218 | 3-1/8 | 3-3/16 | 3-1/4 | 80 | 90 | 120 | 52 | 18 | M90x2 | 1.2 | A218 | KM18 | MB18 |
H219 | 3-5/16 | 3-1/4 | 85 | 95 | 125 | 55 | 19 | M95x2 | 1.35 | A219 | KM19 | MB19 | |
H220 | 3-7/16 | 3-1/2 | 90 | 100 | 130 | 58 | 20 | M100x2 | 1.5 | A220 | KM20 | MB20 | |
H221 | 95 | 105 | 140 | 60 | 20 | M105x2 | 1.7 | A221 | KM21 | MB21 | |||
H222 | 3-15/16 | 4 | 100 | 110 | 145 | 63 | 21 | M110x2 | 1.9 | A222 | KM22 | MB22 |
Adapter Sleeve | Shaftd1 | Dimensions(mm) | Weight (kg) | Composition | |||||||||
HS in | HA in | HE in | H mm | d | d2 | B1 | B2 | G | Sleeve | Locknut | Lockwasher | ||
H304 | 17 | 20 | 32 | 28 | 7 | M20x1 | 0.045 | A304 | KM4 | MB04 | |||
H305 | 7/8 | 13/16 | 3/4 | 20 | 25 | 38 | 29 | 8 | M25x1.5 | 0.075 | A305 | KM5 | MB05 |
H306 | 7/8 | 15/16 | 1 | 25 | 30 | 45 | 31 | 8 | M30x1.5 | 0.11 | A306 | KM6 | MB06 |
H307 | 1-1/8 | 1-3/16 | 1-1/4 | 30 | 35 | 52 | 35 | 9 | M35x1.5 | 0.14 | A307 | KM7 | MB07 |
H308 | 1-3/8 | 1-5/16 | 1-1/4 | 35 | 40 | 58 | 36 | 10 | M40x1.5 | 0.19 | A308 | KM8 | MB08 |
H309 | 1-5/8 | 1-7/16 | 1-1/2 | 40 | 45 | 65 | 39 | 11 | M45x1.5 | 0.25 | A309 | KM9 | MB09 |
H310 | 1-5/8 | 1-11/16 | 1-3/4 | 45 | 50 | 70 | 42 | 12 | M50x1.5 | 0.3 | A310 | KM10 | MB10 |
H311 | 1-7/8 | 1-15/16 | 2 | 50 | 55 | 75 | 45 | 12 | M55x2 | 0.35 | A311 | KM11 | MB11 |
H312 | 2-1/8 | 2-1/16 | 2-1/4 | 55 | 60 | 80 | 47 | 13 | M60x2 | 0.39 | A312 | KM12 | MB12 |
H313 | 2-3/8 | 2-3/16 | 2-1/4 | 60 | 65 | 85 | 50 | 14 | M65x2 | 0.46 | A313 | KM13 | MB13 |
H314 | 60 | 70 | 92 | 52 | 14 | M70x2 | 0.72 | A314 | KM14 | MB14 | |||
H315 | 2-5/8 | 2-7/16 | 2-1/2 | 65 | 75 | 98 | 55 | 15 | M75x2 | 0.83 | A315 | KM15 | MB15 |
H316 | 2-7/8 | 2-11/16 | 2-3/4 | 70 | 80 | 105 | 59 | 17 | M80x2 | 1 | A316 | KM16 | MB16 |
H317 | 2-15/16 | 3 | 75 | 85 | 110 | 63 | 18 | M85x2 | 1.2 | A317 | KM17 | MB17 | |
H318 | 3-1/8 | 3-3/16 | 3-1/4 | 80 | 90 | 120 | 65 | 18 | M90x2 | 1.35 | A318 | KM18 | MB18 |
H319 | 3-5/16 | 3-1/4 | 85 | 95 | 125 | 68 | 19 | M95x2 | 1.55 | A319 | KM19 | MB19 | |
H320 | 3-7/16 | 3-1/2 | 90 | 100 | 130 | 71 | 20 | M100x2 | 1.7 | A320 | KM20 | MB20 | |
H321 | 95 | 105 | 140 | 74 | 20 | M105x2 | 1.95 | A321 | KM21 | MB21 | |||
H322 | 3-15/16 | 4 | 100 | 110 | 145 | 77 | 21 | M110x2 | 2.2 | A322 | KM22 | MB22 |
Adapter Sleeve Other Modles In Stock
H205 | H305 | H2305 | H3005 | H3024 |
H206 | H306 | H2306 | H3006 | H3026 |
H207 | H307 | H2307 | H3007 | H3028 |
H208 | H308 | H2308 | H3008 | H3030 |
H209 | H309 | H2309 | H3009 | H3032 |
H210 | H310 | H2310 | H3010 | H3034 |
H211 | H311 | H2311 | H3011 | H3036 |
H212 | H312 | H2312 | H3012 | H3038 |
H213 | H313 | H2313 | H3013 | H3040 |
H214 | H314 | H2314 | H3014 | H3042 |
H215 | H315 | H2315 | H3015 | H3044 |
H216 | H316 | H2316 | H3016 | H3048 |
H217 | H317 | H2317 | H3017 | H3052 |
H218 | H318 | H2318 | H3018 | H3056 |
H219 | H319 | H2319 | H3019 | H3060 |
H220 | H320 | H2320 | H3020 | H3064 |
H221 | H321 | H2321 | H3021 | H3068 |
H222 | H322 | H2322 | H3022 | H3072 |
Company Advantages
Shandong XSY Bearing Co.,Ltd. is a Professional and leading factory of thrust roller &ball bearings in China market,With m ore than 25 years experiences in producing, R&D and sales bearing lines.
The next is our brief intorduction,hope you can like it.
1.World quality, global share.
2.Since 1990.
3.Affordable, Durable, &Classical
4.OEM & ODM service are available.
5.Super Quality & Favorable price
XSY Bearing--Your trustworthy professional bearing expert!
Packing & Shipments
FAQ:
1.Could you please tell me the delivery time of your goods?
3-7days stock goods and other goods according to your quantity about 3-30 days
2.How about MOQ of your product?
our MOQ is 1 piece
3.Can you tell me the payment terms can be accepted of your company?
T/T,Western union,Paypal ,L/C
4.Can you accept OEM and customize?
Yes,we can customize for you according to your sample,blueprint or drawings with parameters
5.Can you supply door to door service?
Yes,by Express(DHL,FEDEX,TNT,EMS)it will take 3-7 das to your country
6.Can supply sample for free?
Yes,we can supply our clients with free sample,but you have to afford freight.
7.What certificate does your factory owned?
we have TUV and ISO9001:2008 certificate,we can do for you if you need other certificate.
8.Are you factory or trading company?
Factory+trading company
9.How long does your bearings guarantee for?
1 year,customers need to supply us with bearings' pictures and sent the bearings back.
10.Can you tell me the material of your bearings?
Stainess steel,Gcr15(bearing steel),carbon steel,chrome steel,plastic,ceramic
11.Can you tell me the packing of your bearings?
single plastic bag+single paper box+single or wooden case+pallet
Features of Adapter sleeve:
Adapter sleeve (H)
Adapter sleeves are the most commonly used components for locating bearings that has a tapered bore, onto cylindrical shaft seating's as they can be employed both on smooth shafts and stepped shafts.
They are easy to mount and require no additional fixation on the shaft. Using adapter sleeves on smooth shafts, the bearing can be located at any position on the shaft . EESCO adapter sleeves are supplied complete with lock nut and locking device.
Adapter sleeve for oil injection (OH)
These sleeves have an oil supply duct (or ducts) at the threaded side of the sleeve and distributor grooves in the bore as well as the outside surface.
Sleeves up to and including size 40 have on supply duct, larger sleeves have two.
Withdrawal sleeve (AH)
Withdrawal sleeves can be used to mount bearings with tapered bore on cylindrical seating's of stepped shafts. The sleeve is pressed into the bore of the bearing that abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. The sleeves are slotted and have an external taper of 1:12 or 1:30.
Withdrawal sleeves for oil injection (AOH)
These AOH sleeves have two oil supply ducts at the threaded side as well as oil distributor grooves in the circumferential and axial directions, both in the outside surface and the sleeve bore. If oil is injected through these ducts and grooves, an oil film is formed between the mating surfaces of the bearing and sleeve and between the shaft and sleeve, and the force required to mount the bearing is considerably reduced.
Adapter Sleeve | Shaftd1 | Dimensions(mm) | Weight (kg) | Composition | |||||||||
HS in | HA in | HE in | H mm | d | d2 | B1 | B2 | G | Sleeve | Locknut | Lockwasher | ||
H204 | 17 | 20 | 32 | 24 | 7 | M20x1 | 0.041 | A204 | KM4 | MB04 | |||
H205 | 7/8 | 13/16 | 3/4 | 20 | 25 | 38 | 26 | 8 | M25x1.5 | 0.07 | A205 | KM5 | MB05 |
H206 | 7/8 | 15/16 | 1 | 25 | 30 | 45 | 27 | 8 | M30x1.5 | 0.1 | A206 | KM6 | MB06 |
H207 | 1-1/8 | 1-3/16 | 1-1/4 | 30 | 35 | 52 | 29 | 9 | M35x1.5 | 0.13 | A207 | KM7 | MB07 |
H208 | 1-3/8 | 1-5/16 | 1-1/4 | 35 | 40 | 58 | 31 | 10 | M40x1.5 | 0.17 | A208 | KM8 | MB08 |
H209 | 1-5/8 | 1-7/16 | 1-1/2 | 40 | 45 | 65 | 33 | 11 | M45x1.5 | 0.23 | A209 | KM9 | MB09 |
H210 | 1-5/8 | 1-11/16 | 1-3/4 | 45 | 50 | 70 | 35 | 12 | M50x1.5 | 0.27 | A210 | KM10 | MB10 |
H211 | 1-7/8 | 1-15/16 | 2 | 50 | 55 | 75 | 37 | 12 | M55x2 | 0.31 | A211 | KM11 | MB11 |
H212 | 2-1/8 | 2-1/16 | 2-1/4 | 55 | 60 | 80 | 38 | 13 | M60x2 | 0.35 | A212 | KM12 | MB12 |
H213 | 2-3/8 | 2-3/16 | 2-1/4 | 60 | 65 | 85 | 40 | 14 | M65x2 | 0.4 | A213 | KM13 | MB13 |
H214 | 60 | 70 | 92 | 41 | 14 | M70x2 | 0.6 | A214 | KM14 | MB14 | |||
H215 | 2-5/8 | 2-7/16 | 2-1/2 | 65 | 75 | 98 | 43 | 15 | M75x2 | 0.71 | A215 | KM15 | MB15 |
H216 | 2-7/8 | 2-11/16 | 2-3/4 | 70 | 80 | 105 | 46 | 17 | M80x2 | 0.88 | A216 | KM16 | MB16 |
H217 | 2-15/16 | 3 | 75 | 85 | 110 | 50 | 18 | M85x2 | 1.02 | A217 | KM17 | MB17 | |
H218 | 3-1/8 | 3-3/16 | 3-1/4 | 80 | 90 | 120 | 52 | 18 | M90x2 | 1.2 | A218 | KM18 | MB18 |
H219 | 3-5/16 | 3-1/4 | 85 | 95 | 125 | 55 | 19 | M95x2 | 1.35 | A219 | KM19 | MB19 | |
H220 | 3-7/16 | 3-1/2 | 90 | 100 | 130 | 58 | 20 | M100x2 | 1.5 | A220 | KM20 | MB20 | |
H221 | 95 | 105 | 140 | 60 | 20 | M105x2 | 1.7 | A221 | KM21 | MB21 | |||
H222 | 3-15/16 | 4 | 100 | 110 | 145 | 63 | 21 | M110x2 | 1.9 | A222 | KM22 | MB22 |
Adapter Sleeve | Shaftd1 | Dimensions(mm) | Weight (kg) | Composition | |||||||||
HS in | HA in | HE in | H mm | d | d2 | B1 | B2 | G | Sleeve | Locknut | Lockwasher | ||
H304 | 17 | 20 | 32 | 28 | 7 | M20x1 | 0.045 | A304 | KM4 | MB04 | |||
H305 | 7/8 | 13/16 | 3/4 | 20 | 25 | 38 | 29 | 8 | M25x1.5 | 0.075 | A305 | KM5 | MB05 |
H306 | 7/8 | 15/16 | 1 | 25 | 30 | 45 | 31 | 8 | M30x1.5 | 0.11 | A306 | KM6 | MB06 |
H307 | 1-1/8 | 1-3/16 | 1-1/4 | 30 | 35 | 52 | 35 | 9 | M35x1.5 | 0.14 | A307 | KM7 | MB07 |
H308 | 1-3/8 | 1-5/16 | 1-1/4 | 35 | 40 | 58 | 36 | 10 | M40x1.5 | 0.19 | A308 | KM8 | MB08 |
H309 | 1-5/8 | 1-7/16 | 1-1/2 | 40 | 45 | 65 | 39 | 11 | M45x1.5 | 0.25 | A309 | KM9 | MB09 |
H310 | 1-5/8 | 1-11/16 | 1-3/4 | 45 | 50 | 70 | 42 | 12 | M50x1.5 | 0.3 | A310 | KM10 | MB10 |
H311 | 1-7/8 | 1-15/16 | 2 | 50 | 55 | 75 | 45 | 12 | M55x2 | 0.35 | A311 | KM11 | MB11 |
H312 | 2-1/8 | 2-1/16 | 2-1/4 | 55 | 60 | 80 | 47 | 13 | M60x2 | 0.39 | A312 | KM12 | MB12 |
H313 | 2-3/8 | 2-3/16 | 2-1/4 | 60 | 65 | 85 | 50 | 14 | M65x2 | 0.46 | A313 | KM13 | MB13 |
H314 | 60 | 70 | 92 | 52 | 14 | M70x2 | 0.72 | A314 | KM14 | MB14 | |||
H315 | 2-5/8 | 2-7/16 | 2-1/2 | 65 | 75 | 98 | 55 | 15 | M75x2 | 0.83 | A315 | KM15 | MB15 |
H316 | 2-7/8 | 2-11/16 | 2-3/4 | 70 | 80 | 105 | 59 | 17 | M80x2 | 1 | A316 | KM16 | MB16 |
H317 | 2-15/16 | 3 | 75 | 85 | 110 | 63 | 18 | M85x2 | 1.2 | A317 | KM17 | MB17 | |
H318 | 3-1/8 | 3-3/16 | 3-1/4 | 80 | 90 | 120 | 65 | 18 | M90x2 | 1.35 | A318 | KM18 | MB18 |
H319 | 3-5/16 | 3-1/4 | 85 | 95 | 125 | 68 | 19 | M95x2 | 1.55 | A319 | KM19 | MB19 | |
H320 | 3-7/16 | 3-1/2 | 90 | 100 | 130 | 71 | 20 | M100x2 | 1.7 | A320 | KM20 | MB20 | |
H321 | 95 | 105 | 140 | 74 | 20 | M105x2 | 1.95 | A321 | KM21 | MB21 | |||
H322 | 3-15/16 | 4 | 100 | 110 | 145 | 77 | 21 | M110x2 | 2.2 | A322 | KM22 | MB22 |
Adapter Sleeve Other Modles In Stock
H205 | H305 | H2305 | H3005 | H3024 |
H206 | H306 | H2306 | H3006 | H3026 |
H207 | H307 | H2307 | H3007 | H3028 |
H208 | H308 | H2308 | H3008 | H3030 |
H209 | H309 | H2309 | H3009 | H3032 |
H210 | H310 | H2310 | H3010 | H3034 |
H211 | H311 | H2311 | H3011 | H3036 |
H212 | H312 | H2312 | H3012 | H3038 |
H213 | H313 | H2313 | H3013 | H3040 |
H214 | H314 | H2314 | H3014 | H3042 |
H215 | H315 | H2315 | H3015 | H3044 |
H216 | H316 | H2316 | H3016 | H3048 |
H217 | H317 | H2317 | H3017 | H3052 |
H218 | H318 | H2318 | H3018 | H3056 |
H219 | H319 | H2319 | H3019 | H3060 |
H220 | H320 | H2320 | H3020 | H3064 |
H221 | H321 | H2321 | H3021 | H3068 |
H222 | H322 | H2322 | H3022 | H3072 |
Company Advantages
Shandong XSY Bearing Co.,Ltd. is a Professional and leading factory of thrust roller &ball bearings in China market,With m ore than 25 years experiences in producing, R&D and sales bearing lines.
The next is our brief intorduction,hope you can like it.
1.World quality, global share.
2.Since 1990.
3.Affordable, Durable, &Classical
4.OEM & ODM service are available.
5.Super Quality & Favorable price
XSY Bearing--Your trustworthy professional bearing expert!
Packing & Shipments
FAQ:
1.Could you please tell me the delivery time of your goods?
3-7days stock goods and other goods according to your quantity about 3-30 days
2.How about MOQ of your product?
our MOQ is 1 piece
3.Can you tell me the payment terms can be accepted of your company?
T/T,Western union,Paypal ,L/C
4.Can you accept OEM and customize?
Yes,we can customize for you according to your sample,blueprint or drawings with parameters
5.Can you supply door to door service?
Yes,by Express(DHL,FEDEX,TNT,EMS)it will take 3-7 das to your country
6.Can supply sample for free?
Yes,we can supply our clients with free sample,but you have to afford freight.
7.What certificate does your factory owned?
we have TUV and ISO9001:2008 certificate,we can do for you if you need other certificate.
8.Are you factory or trading company?
Factory+trading company
9.How long does your bearings guarantee for?
1 year,customers need to supply us with bearings' pictures and sent the bearings back.
10.Can you tell me the material of your bearings?
Stainess steel,Gcr15(bearing steel),carbon steel,chrome steel,plastic,ceramic
11.Can you tell me the packing of your bearings?
single plastic bag+single paper box+single or wooden case+pallet